Skip to the page
Ask for a free quote
Clark County Holiday Lighting

Permanent Christmas Lights Cost in Vancouver, WA

Permanent christmas lights in Vancouver, WA are priced by the foot of roofline, and the published figures run from about $20 to $40 a foot installed. What follows is where those numbers come from and how many seasons they take to pay back.

Per-foot figures only go so far. Send your footage and a Clark County, WA installer prices the track, controller and power for your house.

Ask for a free quote

How much does it cost to have someone install permanent Christmas lights in Vancouver, WA?

HomeGuide gives $20 to $40 per linear foot installed, or $2,000 to $8,000 for a typical 100 to 200 feet. HomeAdvisor puts the average permanent installation at $3,500. Contractor+, a contractor-software firm, publishes a calculator for Vancouver, WA that models 100 feet at $2,333 to $4,667. Those three agree more than they differ: for a single-storey roofline of about 100 feet, all three point to the low thousands.

Source What it publishes Read
HomeGuide, 17 September 2024 $20 to $40 per linear foot installed; $2,000 to $8,000 on average; 100 feet $2,000 to $4,000, 200 feet $4,000 to $8,000 12 Nov 2026
HomeAdvisor, updated 19 June 2026 an average of $3,500 for a permanent installation 12 Nov 2026
Contractor+ calculator for Vancouver, WA 100 feet modelled at $2,333 to $4,667, about $33 a foot at the midpoint, with a 30% contractor markup built in 12 Nov 2026

Read the third row for what it is. It is a model, built from assumed material prices, an assumed local labour rate and a markup. It is not a survey of quotes. It is the only one of the three that names Vancouver, WA, and it lands inside HomeGuide's per-foot range.

The gable and eaves of a split-level house traced by a permanent lighting track, its points lit in alternating blue and amber under an overcast sky

What changes a permanent lighting quote

The footage sets the base. These move it from there.

  1. Corners and gables. A straight eave is quick. Every corner, peak and change of direction means cutting, joining and fitting, so a split-level with three gables usually costs more per foot than a long, plain ranch roofline.
  2. Storeys. Second-storey eaves mean longer ladders or a lift.
  3. Power. If the controller can plug into an outdoor outlet where it needs to sit, there is no extra work. If it cannot, someone has to add one, and in Washington that is electrical work. HomeAdvisor suggests budgeting $50 to $100 an hour for a licensed electrician when new outdoor wiring is needed.
  4. The kind of system. Washington's line between factory-assembled products and custom, cut-to-fit systems decides who may install it and whether a permit and inspection follow. The permanent christmas lights page draws that line from L&I's own words. A permit, where needed, is part of the cost.
  5. Zones and controller. More separately controlled runs, front and back or house and garage, can mean more hardware.
  6. Track finish. Ask whether a track colour-matched to your trim costs more than the stock colour.

My house is about 2,200 square feet. What would permanent lights on the front run?

Square footage does not set the price. The front roofline does. A 2,200 square foot single-storey ranch can carry far more front gutter than a 2,200 square foot two-storey house, because the same floor area is spread wider.

So measure the front. If the gutter line and the garage come to 80 feet, HomeGuide's $20 to $40 a foot gives $1,600 to $3,200. If they come to 120 feet, it gives $2,400 to $4,800. Add a gable or two and expect the upper half of the range. Those are arithmetic on a published range, not a quote.

Are permanent Christmas lights worth the cost?

Compare the system with a seasonal christmas light installation in Vancouver, WA, the job you would otherwise pay for every autumn. Take 100 feet of roofline as the example.

Permanent, once Seasonal, each year
Published range $2,000 to $4,000 (HomeGuide, 100 feet) $220 to $683, up and down (HomeAdvisor)
Middle of the range about $3,000 about $444 (HomeAdvisor's typical project)

Divide one by the other. At the middle of both ranges, the permanent system matches about seven seasons of hung lights. At the cheap end of permanent and the dear end of seasonal, it is about three seasons. At the dear end of permanent and the cheap end of seasonal, it is more than eighteen.

So the answer turns on three things you know better than any guide. How long you will stay in the house, because seven years is a long time for some households and short for others. What you pay now, or would pay, for seasonal lights. And how many nights outside December you would light the eaves, since a seasonal install cannot do the Fourth of July and a permanent one can.

The costs that come after installation

The quote is not the last bill, and nobody publishes reliable figures for what follows, so ask about each.

  • A section or a power supply failing in year four. Ask what the warranty covers, for how long, and whether the installer or the maker honours it.
  • Reroofing, new gutters or painting the fascia. The track usually has to come off and go back up. Ask the installer for that price now, while you are comparing quotes.
  • The app. Some systems need an account and some carry a fee for extra features. Ask before you buy.
  • Selling the house. The system stays with the house, so price it as an improvement you may not recover in full.

Electricity is the small line, and it is the one the guides on this page do not price for a permanent system. The points are LED and the lights run only when you switch them on, so ask the installer for the wattage of your run if you want to work out the monthly cost yourself.

Smaller questions about permanent lighting prices

Is there a cheaper way to get permanent lights?

Kits sold for homeowners to fit themselves cost much less: HomeGuide puts them at $8 to $20 a foot. The trade is the ladder work, the layout and the power. Washington's electrical rules treat a homeowner working on their own house differently from a hired installer (RCW 19.28.261), so ask the permit office for your address before you cut or wire anything.

Is the permit fee in the price?

Ask, because quotes differ. If a permit is needed, inside the city limits of Vancouver, WA it comes from the City, and elsewhere in Clark County, WA the installer should tell you who issues it. The rule on when one is needed is set out on the permanent christmas lights page.

Does the price include the controller and the app?

It should. Check that the quote names the controller, the power supply and how many separate zones you can light, and whether the app carries any yearly fee.

Do permanent lights use much electricity?

The points are LEDs, and you choose how many hours a night they run. Ask the installer for the wattage of the full run at full brightness; multiply by your hours and your utility rate and you have the monthly figure for your own house.

How do I get an exact price for permanent lights on my house?

Measure the runs you want lit, note the storeys and where the nearest outdoor outlet is, and send them in a quote request. A local installer in Clark County, WA prices the job before anything is mounted, and you decide whether to go ahead. For lights that come down each January instead, see the christmas light installation cost page.

Your roofline, in a few lines

Four short boxes and a line. Saying no costs nothing.

Which kind of lights?

Sent to one local installer for this quote. How the details are handled